Line Magnetic 508ia – What To Look For..

The real truth about speaker cables – what the manufacturers didn’t want you to know. Speaker cables play a remarkably important role, and yet many individuals appear to be unclear about exactly what makes a great speaker cable, and what you should consider when purchasing Cayin A100t. A common analogy is that speaker cables are like the arteries of your house entertainment system. The same as your arteries carry blood from your heart and deliver it around your body, so your speaker cables carry audio signals away from your amplifier or receiver and deliver them to the various speakers placed around the room.

With every single manufacturer claiming their cable provides the best performance it can be extremely hard choosing what sort of speaker cable to go for; along with prices which range from some dollars to literally thousands of dollars per foot, it’s hard to know whether you got an excellent bargain, or were scammed.

It doesn’t help there is really much misinformation available; in fact most of the so called experts are in reality just making things worse by spreading myths and rumours disguised as hard facts. Bearing that in mind, below are a few simple things that you should consider the very next time you venture to buy new cable.

All cables have problems with resistance to some degree but you will find that the thicker the speaker cable, the low the resistance; so it’s wise to choose a cable using a decent gauge. The thickness of the cable may depend upon how much time you desire the cable to be, but as a general rule of thumb for runs of up to 15 feet a 16 gauge cable should be perfectly fine. For runs between 15 and 25 feet make use of a gauge 14 cable, as well as for runs over 25 feet use a 12 gauge cable. Typically the Speaker Cable (those with the low gauge numbers) are certainly more expensive, so don’t be fooled into paying extra for any thick12 gauge cable if a thinner 16 gauge cable will be adequate.

Another point of much confusion is if to employ a connector on the end in the cable. Lots of people reason that it is best to simply use the bare end of the cable, while just like many say that you should use some kind of connector such as a banana plug or spade terminal. The key benefit of using connectors is because they allow it to be quicker to connect and disconnect the cable quickly, but they have no bearing on the expertise of the sound in any way. The easy truth is that it doesn’t really matter how you will connect your speaker cable, the sole essential thing would be that the wire is secure as well as the terminal is provided for free from corrosion.

Lots of people also ask if the speaker cable must be the identical length for every speaker. Should you be operating a 5.1 or 7.1 surround speakers then it may be very expensive to get enough cable to make sure that each cable is exactly the same length and it’s also a total waste of money! This ‘every cable needs to be the identical length’ myth was just started by manufacturers as being a bhrxeq of obtaining consumers to buy more cable.

Only use just as much Line Magnetic 518ia as you need to get in touch each speaker to your amplifier or receiver. There is absolutely no need to make each cable the identical length, in the end, what is the part of paying for a 10 foot run of cable in case a 5 foot run is everything required? It is important to take careful measurements before buying your cable. A good tip would be to lay out some string following the path you desire your cable to consider, after that you can look at the string to learn the exact length of cable you will need.

Leave a comment

Your email address will not be published. Required fields are marked *